European Mount Installation Instructions
Step by Step Instructions
1) Place the first screw provided for the top of the hanger into the mounting surface leaving about 5/8" from face of screw head to the wall
2) Place wall bracket onto screw with "WALL" facing the wall and tear drop hole up.
3) Insert prong into wall bracket
4) Place mount onto prong and rotate until desired angle is achieved
5) Insert bottom screw provided into wall bracket to secure wall bracket to wall and keep angle
Saftey
Always ensure that all screws for wall brackets are secured to a stud. For table displays and floor displays always ensure a safe mounting location to keep from getting bumped. For trophy tree always counter balance weight of the trophy tree to prevent it from falling to one side. For all products make sure all hardware is fully tightened before releasing weight of a hanging head.
Installation
Back of the skull must not be cut or altered. Simply insert prong into natural opening in skull (Foreman Magnum). Prong should be in contact with top of brain cavity and the bottom of the Foreman Magnum. No drilling required!
Tools
Phillips screwdriver or drill with Phillips drive head is all that is needed for the European Mount Hanger. Two screws are included with every European Mount Hanger purchase.
Angle Adjustment
Determine proper angle adjustment, then simply insert supplied screw into bottom open hole location.